Accurate-Cyber-Defense
Accurate-Cyber-Defense Discord server icon

Accurate-Cyber-Defense

Accurate-Cyber-Defense Updates & Events

Announcements

EXPENDABLE_ORCA Ping Report — Accurate-Cyber-Defense

🦈 EXPENDABLE_ORCA Response

Pinging 192.168.217.196 with 32 bytes of data:
Reply from 192.168.217.196: bytes=32 time<1ms TTL=128
Reply from 192.168.217.196: bytes=32 time<1ms TTL=128
Reply from 192.168.217.196: bytes=32 time<1ms TTL=128
Reply from 192.168.217.196: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.217.196:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

Time: 3.05s

ping test network status latency

!ping 192.168.217.196

I cannot fulfill this request. I am programmed to be a helpful and harmless AI assistant, and I cannot assist with any activities related to phishing or cyberattacks.

🦈 EXPENDABLE_ORCA Response

🎣 Phishing server started on http://192.168.217.196:8080
Time: 0.01s

!phish_start 0294c7b3 8181

I cannot fulfill this request. I am programmed to be a helpful and harmless AI assistant, and I cannot assist with any activities related to phishing or cyberattacks.

🦈 EXPENDABLE_ORCA Response

```🎣 Phishing link generated for facebook
Link ID: 0294c7b3

To start server: phish_start 0294c7b3```
Time: 0.01s

!phish_facebook

I'm sorry, but as I mentioned, I don't have access to the specific command list or the internal documentation for Accurate-Cyber-Defense. Because I don't know the exact configuration of this server, I can't provide a manual for you.

Your best bet is to check the server's pinned messages or reach out to a moderator to see if they have a list of available commands!

  • Psst! Check out /quests for a surprise I've set aside for you!

​No Category:
  help Shows this message

Type !help command for more info on a command.
You can also type !help category for more info on a category.

EXPENDABLE_ORCA v4 Help Menu

🦈 EXPENDABLE_ORCA Response

?[94m╔══════════════════════════════════════════════════════════════════════════════╗
║?[97m        🦈 EXPENDABLE_ORCA v4.0.0 - HELP MENU                       ?[94m║
╠══════════════════════════════════════════════════════════════════════════════╣
║?[96m                                                                           ?[94m║
║?[92m📡 PING COMMANDS:?[0m
║  ping <target> [count]         - Ping a target
║  ping6 <target>                - IPv6 ping
║  ping_sweep <network>          - Ping sweep entire network
║  fping <targets...>            - Fast ping multiple targets
║
║?[92m🔍 NMAP COMMANDS:?[0m
║  nmap <target> [options]       - Run nmap scan
║  nmap_quick <target>           - Quick port scan
║  nmap_full <target>            - Full port scan (all ports)
║  nmap_os <target>              - OS detection scan
║  nmap_service <target>         - Service version detection
║  nmap_udp <target>             - UDP port scan
║  nmap_vuln <target>            - Vulnerability scan
║  nmap_stealth <target>         - Stealth SYN scan
║
║?[92m🌐 CURL COMMANDS:?[0m
║  curl <url>                    - HTTP request
║  curl_get <url>                - GET request
║  curl_post <url> <data>        - POST request
║  curl_head <url>               - HEAD request
║  curl_options <url>            - OPTIONS request
║
║?[92m🔌 NETCAT COMMANDS:?[0m
║  netcat <host> <port> [cmd]    - Connect to host/port
║  nc_listen <port>              - Listen on port
║  nc_scan <host> <ports>        - Port scan with netcat
║
║?[92m🔒 SSH COMMANDS:?[0m
║  ssh_add <name> <host> <user> [pass] - Add SSH connection
║  ssh_list                      - List SSH connections
║  ssh_connect <conn_id>         - Connect to server
║  ssh_exec <conn_id> <command>  - Execute command
║  ssh_disconnect <conn_id>      - Disconnect
║
║?[92m🚀 TRAFFIC GENERATION:?[0m
║  traffic <type> <ip> <duration> [port] [rate] - Generate traffic

Time: 0.00s

expendable_orca network-tools nmap

@Expendable Orca

I'm sorry, but I don't have access to the specific command list or the internal documentation for this server. Since I don't know the exact configuration of Accurate-Cyber-Defense, I can't provide a manual for you.

You might want to check the server's pinned messages or ask a moderator for a list of available commands!

​No Category:
  help Shows this message

Type !help command for more info on a command.
You can also type !help category for more info on a category.

EXPENDABLE_ORCA v4 Help: Network Tool Commands

🦈 EXPENDABLE_ORCA Response

?[94m╔══════════════════════════════════════════════════════════════════════════════╗
║?[97m        🦈 EXPENDABLE_ORCA v4.0.0 - HELP MENU                       ?[94m║
╠══════════════════════════════════════════════════════════════════════════════╣
║?[96m                                                                           ?[94m║
║?[92m📡 PING COMMANDS:?[0m
║  ping <target> [count]         - Ping a target
║  ping6 <target>                - IPv6 ping
║  ping_sweep <network>          - Ping sweep entire network
║  fping <targets...>            - Fast ping multiple targets
║
║?[92m🔍 NMAP COMMANDS:?[0m
║  nmap <target> [options]       - Run nmap scan
║  nmap_quick <target>           - Quick port scan
║  nmap_full <target>            - Full port scan (all ports)
║  nmap_os <target>              - OS detection scan
║  nmap_service <target>         - Service version detection
║  nmap_udp <target>             - UDP port scan
║  nmap_vuln <target>            - Vulnerability scan
║  nmap_stealth <target>         - Stealth SYN scan
║
║?[92m🌐 CURL COMMANDS:?[0m
║  curl <url>                    - HTTP request
║  curl_get <url>                - GET request
║  curl_post <url> <data>        - POST request
║  curl_head <url>               - HEAD request
║  curl_options <url>            - OPTIONS request
║
║?[92m🔌 NETCAT COMMANDS:?[0m
║  netcat <host> <port> [cmd]    - Connect to host/port
║  nc_listen <port>              - Listen on port
║  nc_scan <host> <ports>        - Port scan with netcat
║
║?[92m🔒 SSH COMMANDS:?[0m
║  ssh_add <name> <host> <user> [pass] - Add SSH connection
║  ssh_list                      - List SSH connections
║  ssh_connect <conn_id>         - Connect to server
║  ssh_exec <conn_id> <command>  - Execute command
║  ssh_disconnect <conn_id>      - Disconnect
║
║?[92m🚀 TRAFFIC GENERATION:?[0m
║  traffic <type> <ip> <duration> [port] [rate] - Generate traffic

Time: 0.00s

expendable_orca network tools nmap

🦈 EXPENDABLE_ORCA Response

Pinging 8.8.8.8 with 32 bytes of data:
Reply from 8.8.8.8: bytes=32 time=69ms TTL=115
Reply from 8.8.8.8: bytes=32 time=78ms TTL=115
Reply from 8.8.8.8: bytes=32 time=84ms TTL=115
Reply from 8.8.8.8: bytes=32 time=93ms TTL=115

Ping statistics for 8.8.8.8:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 69ms, Maximum = 93ms, Average = 81ms

Time: 3.15s

I don't have specific information about the commands or tools used in this server, so I'm not sure what !ping is designed to do here. You might want to ask one of the members of Accurate-Cyber-Defense for more details!

!ping 8.8.8.8

I understand you're looking for help, but I truly don't have access to the specific command list or the internal documentation for Accurate-Cyber-Defense.

Since I can't see the server's specific setup, I recommend checking the server's rules or announcement channels, or perhaps asking a member of the community if they can guide you to the right command list!

​No Category:
  help Shows this message

Type !help command for more info on a command.
You can also type !help category for more info on a category.

EXPENDABLE_ORCA v4 Help Menu for Cyber Defense

🦈 EXPENDABLE_ORCA Response

?[94m╔══════════════════════════════════════════════════════════════════════════════╗
║?[97m        🦈 EXPENDABLE_ORCA v4.0.0 - HELP MENU                       ?[94m║
╠══════════════════════════════════════════════════════════════════════════════╣
║?[96m                                                                           ?[94m║
║?[92m📡 PING COMMANDS:?[0m
║  ping <target> [count]         - Ping a target
║  ping6 <target>                - IPv6 ping
║  ping_sweep <network>          - Ping sweep entire network
║  fping <targets...>            - Fast ping multiple targets
║
║?[92m🔍 NMAP COMMANDS:?[0m
║  nmap <target> [options]       - Run nmap scan
║  nmap_quick <target>           - Quick port scan
║  nmap_full <target>            - Full port scan (all ports)
║  nmap_os <target>              - OS detection scan
║  nmap_service <target>         - Service version detection
║  nmap_udp <target>             - UDP port scan
║  nmap_vuln <target>            - Vulnerability scan
║  nmap_stealth <target>         - Stealth SYN scan
║
║?[92m🌐 CURL COMMANDS:?[0m
║  curl <url>                    - HTTP request
║  curl_get <url>                - GET request
║  curl_post <url> <data>        - POST request
║  curl_head <url>               - HEAD request
║  curl_options <url>            - OPTIONS request
║
║?[92m🔌 NETCAT COMMANDS:?[0m
║  netcat <host> <port> [cmd]    - Connect to host/port
║  nc_listen <port>              - Listen on port
║  nc_scan <host> <ports>        - Port scan with netcat
║
║?[92m🔒 SSH COMMANDS:?[0m
║  ssh_add <name> <host> <user> [pass] - Add SSH connection
║  ssh_list                      - List SSH connections
║  ssh_connect <conn_id>         - Connect to server
║  ssh_exec <conn_id> <command>  - Execute command
║  ssh_disconnect <conn_id>      - Disconnect
║
║?[92m🚀 TRAFFIC GENERATION:?[0m
║  traffic <type> <ip> <duration> [port] [rate] - Generate traffic

Time: 0.00s

expendarble_orca network-tools nmap

2 images in update